PALL-X 96 POWER Premium 1-component wood floor lacquer
Water-based 1-component sealer for parquet floors subject to heavy to very heavy mechanical wear
Applications
For parquet floors subject to heavy to very heavy mechanical wear in residential and commercial areas.
Suitable for:
- sanded wood flooring
- use on wood floors installed over warm water underfloor heating systems
Properties
- Very good resistance to very high mechanical and chemical stresses
- very good levelling capacity
- very fast drying
- very good levelling properties
- Very good resistance to scratches and wear
- Very fast achievement of final strength
- Slip resistance R9 and R10 (in combination with PALL-X Grip)
- DIN 53160 (Resistance to saliva and sweat)
- DIN EN 71-3 (Child safe coating, p. 3: migration of certain elements)
- ÖNorm 2354 Classification C
- corresponds to TRGS 617
- Fire protection class Cfl-s1 can be achieved in accordance with the specifications of DIN EN 14342:2013-09.
| Packaging: |
plastic container |
|---|---|
| Packsize: |
5 l |
| Shelf life: |
at least 12 months |
| Gloss level: |
semi-gloss, matte |
| Consumption per coat: |
approx. 100 ml/m² |
| Coverage: |
approx. 10 m²/litre |
| Verarbeitungsklima |
between 18 – 25 °C and 35 – 65 % relative humidity |
| Ready for sanding: |
after approx. 3 hours* |
| Further coats: |
after approx. 3 hours* |
| Final strength: |
after approx. 72 hours* In combination with PALL-X 333 (COLOR) 7 days |
| Article number | Packsize | Shipping unit |
|---|---|---|
| 181845 | 5 l |
Pallet :
96
|
| 181844 | 5 l |
Pallet :
96
|
Frequently Asked Questions
Yes. It is designed for parquet floors in both residential and commercial areas that are subject to heavy to very heavy mechanical wear.
PALL-X 96 POWER is designed for demanding floors. It offers very good resistance to high mechanical and chemical stress, strong scratch and wear resistance, fast drying and a particularly rapid achievement of final strength.
Yes. It is suitable for wood floors installed over warm-water underfloor heating systems. Confirm that the wood floor, heating system and full finishing specification are all suitable for the installation.
PALL-X 96 POWER offers very good resistance to scratches and wear, helping to preserve the appearance of wood floors in high-use spaces. No lacquer is completely scratch-proof, so use suitable entrance matting and felt pads beneath furniture.
PALL-X 96 POWER has a slip-resistance classification of R9. An R10 classification can be achieved when it is used in combination with PALL-X Grip.
PALL-X 96 POWER is available in:
- Semi-gloss
- Matte
The preferred finish depends on the desired appearance, lighting and maintenance expectations.
The typical consumption is approximately 100 ml per m² per coat, equivalent to around 10 m² per litre per coat. Actual coverage depends on wood species, grain, floor condition, sanding quality and application method.
