PALL-X 98 gloss Premium 2-component wood floor lacquer
Water-based 2-component wood floor lacquer with good leveling capacity for very heavy use areas
Applications
For very heavy use wood flooring in residential and commercial applications, including industrial locations. Suitable for:
- sanded wood flooring
- woodblocks
- use on wood floors installed over warm water underfloor heating systems
Properties
- very high resistance to mechanical and chemical wear
- very good levelling capacity
- very fast drying and final strength
- very good levelling properties
- extremely high abrasion resistance
- corresponds to TRGS 617
| Packaging: |
plastic container |
|---|---|
| Packsize: |
l |
| Shelf life: |
months |
| Gloss level: |
gloss |
| Mixing ratio: |
10 : 1 |
| Consumption per coat: |
approx. 130 ml/m² |
| Coverage: |
approx. 7 m²/litre |
| Verarbeitungsklima |
between 18 – 25 °C and 35 – 65 % relative humidity |
| Pot life: |
approx. 4 hours* |
| Ready for sanding: |
after approx. 6-8 hours* |
| Further coats: |
after approx. 6-8 hours* |
| Final strength: |
after approx. 7 days* |
| Article number | Article | Packsize | Shipping unit |
|---|---|---|---|
| 10100 | PALL-X 98 gloss 4,95 l | l |
Pallet :
72
|
Products and accessories
Frequently Asked Questions
Yes. PALL-X 98 Gloss is intended for very heavily used floors in residential, commercial and industrial environments. It is a suitable option where the floor will experience high traffic and demanding service conditions.
Use the specified 10:1 ratio and thoroughly combine the lacquer and hardener until the material is uniform. Inaccurate mixing can affect levelling, drying, cure development and final durability.
The required coating build-up depends on the approved PALLMANN system, including whether a compatible primer, colour system or existing coating is present. Do not assume a generic number of coats; specify the complete system based on the current Product Data Sheet and project performance requirements.
The lacquer is formulated to provide:
- High resistance to mechanical wear
- High resistance to chemical wear
- Extremely high abrasion resistance
- Excellent levelling characteristics
- A high-gloss appearance
These properties make it appropriate for floors exposed to demanding traffic and service conditions.
Yes. PALL-X 98 Gloss is intended for very heavily used wood floors in residential, commercial and industrial locations. Suitability for a specific project should nevertheless consider expected traffic, wheeled loads, cleaning regime, timber type, floor construction and the complete coating specification.
Yes, it is suitable for wood floors installed over warm-water underfloor heating. The heating system must be correctly commissioned, and the wood floor must be suitable for use with underfloor heating. Ensure moisture conditions and surface temperatures are within the flooring and lacquer system requirements.
