PALL-X 98 semi-gloss/matte Premium 2-component wood floor lacquer
Water-based 2-component wood floor lacquer with good leveling capacity for very heavy use areas
Applications
For very heavy use wood flooring in residential and commercial applications, including industrial locations. Suitable for:
- sanded wood flooring
- woodblocks
- use on wood floors installed over warm water underfloor heating systems
Properties
- very high resistance to mechanical and chemical wear
- very good levelling capacity
- very fast drying and final strength
- very good levelling properties
- extremely high abrasion resistance
- ÖNorm 2354 Classification C
- slip resistance R9 in combination with PALL-X GRIP R10
- EN 71-3 (Child safe coating, p. 3: migration of certain elements)
- fire protection Cfl-s1 (primer PALL-X 333 COLOR incl. PALL-X 333 C COLOR CONCENTRATE, minimum thickness solid wood 19 mm, density 480 kg/m³, moisture content 9%)
- corresponds to TRGS 617
| Packaging: |
plastic container |
|---|---|
| Packsize: |
l |
| Shelf life: |
months |
| Gloss level: |
semi-gloss, matte |
| Mixing ratio: |
10 : 1 |
| Consumption per coat: |
approx. 100 ml/m² |
| Coverage: |
approx. 10 m²/litre |
| Verarbeitungsklima |
between 18 – 25 °C and 35 – 65 % relative humidity |
| Pot life: |
approx. 4 hours* |
| Ready for sanding: |
after approx. 4 hours* |
| Further coats: |
approx. 4 hours* |
| Final strength: |
after approx. 7 days* |
| Fast construction: |
PALL-X 320 or 325 in combination with two layers PALL-X 98. |
| Full mech. wear: |
after approx. 24 hours* |
| Full chemical wear: |
after approx. 72 hours* |
| Final strength: |
after approx. 72 hours* |
| Article number | Article | Packsize | Shipping unit |
|---|---|---|---|
| 10094 | PALL-X 98 matte 4,95 l | l |
Pallet :
72
|
| 10093 | PALL-X 98 semi-gloss 4,95 l | l |
Pallet :
72
|
References
Products and accessories
Frequently Asked Questions
Yes. PALL-X 98 is formulated for very heavy-use wood flooring in residential and commercial projects, including industrial locations. It is appropriate where exceptional abrasion, scratch and chemical resistance are required.
A two-component lacquer is chosen where enhanced durability is needed. PALL-X 98 offers very high resistance to mechanical and chemical wear and extremely high abrasion resistance, making it well suited to demanding floors.
Yes. It is suitable for wood floors installed over warm-water underfloor heating systems. The heating system must be properly commissioned, and the wood floor and overall finishing system must be approved for the proposed build-up.
PALL-X 98 offers very high resistance to mechanical and chemical wear, as well as extremely high abrasion resistance. It is designed to protect wood floors in spaces subject to significant traffic and demanding use.
The specified mixing ratio is 10:1. Measure and mix the two components accurately to achieve the intended finish performance.
PALL-X 98 reaches full mechanical wear resistance after approximately 24 hours. This supports fast project turnaround in demanding environments.
